|
Ticket ID: SIXXS #786607 Ticket Status: User PoP: (not applicable)
Junos connectivity to local pop not working
![[nz]](/s/countries/nz.gif) Shadow Hawkins on Monday, 18 August 2008 03:11:11
I have read and followed the "Reporting Problems" section on the Contact page and am providing the following details for this report based on the list of items stated there:
Hi,
I've had my tunnel running without issues to a cisco device in the past, during a DC move we removed the ipv6 router due to lots of network changes taking place, however i'm now ready to stand up the service and offer it to our clients natively to test within our datacenter.
Problem is, the below configuration doesn't appear to work, any help would be appreciated. I've tried setting the MTU to that of your minimum default of 1280 too
icepick@NCCORE01> show configuration interfaces gr-0/0/0 unit 1000
tunnel {
source 60.234.24.30;
destination 202.21.136.122;
path-mtu-discovery;
}
family inet6 {
address 2001:4428:200:a::2/64;
}
I've even added it to trust zone to test:
icepick@NCCORE01# set security zones security-zone trust interfaces gr-0/0/0.1000
Tunnel Name VPN.unix.co.nz
PoP Name nzwlg01
PoP Location Wellington, New Zealand New Zealand
PoP IPv4 202.21.136.122
Your Location Auckland, New Zealand New Zealand
Your IPv4 60.234.68.2
IPv6 Prefix 2001:4428:200:a::1/64
PoP IPv6 2001:4428:200:a::1
Your IPv6 2001:4428:200:a::2
Created 2007-07-01 23:12:04 CEST
Last Alive 2008-05-17 04:06:26 CEST
State Enabled
icepick@NCCORE01> ping 2001:4428:200:a::1
PING6(56=40+8+8 bytes) 2001:4428:200:a::2 --> 2001:4428:200:a::1
^C
--- 2001:4428:200:a::1 ping6 statistics ---
167 packets transmitted, 0 packets received, 100% packet loss
icepick@NCCORE01>
icepick@NCCORE01> ping 202.21.136.122
PING 202.21.136.122 (202.21.136.122): 56 data bytes
64 bytes from 202.21.136.122: icmp_seq=0 ttl=58 time=13.516 ms
64 bytes from 202.21.136.122: icmp_seq=1 ttl=58 time=13.590 ms
64 bytes from 202.21.136.122: icmp_seq=2 ttl=58 time=13.646 ms
64 bytes from 202.21.136.122: icmp_seq=3 ttl=58 time=13.582 ms
64 bytes from 202.21.136.122: icmp_seq=4 ttl=58 time=15.018 ms
64 bytes from 202.21.136.122: icmp_seq=5 ttl=58 time=13.721 ms
^C
--- 202.21.136.122 ping statistics ---
6 packets transmitted, 6 packets received, 0% packet loss
round-trip min/avg/max/stddev = 13.516/13.846/15.018/0.528 ms
Any help would be appreicated.
thanks
barry
State change: user
The state of this ticket has been changed to user
Junos connectivity to local pop not working
I've tried setting the MTU to that of your minimum default of 1280 too
The MTU on both sides of the tunnel have to match, it won't (fully) work when they don't match, one can configure
As you are trying this on a Juniper (which kind, what version etc?) you will need a Tunnel or Advanced Services PIC. See your Juniper documentation for the details.
For the rest see FAQ :: Connectivity :: Setup :: Juniper
and provide a lot more details when you want us to look at it.
|
![[ch]](/s/countries/ch.gif)
on Tuesday, 19 August 2008 09:34:41
Posting is only allowed when you are