Ticket ID: SIXXS #4036897 Ticket Status: User PoP: czprg01 - Ignum, s.r.o. (Prague)
New tunnel pinging but after 24 hours still no stats
![]()
I setup new tunnel and ping it from all around the world. However stats of the tunnel are showing already for 24 hours that it is down.
State change: user
![]() ![]()
The state of this ticket has been changed to user
New tunnel pinging but after 24 hours still no stats
Maybe you should make it properly ping, the PoP needs to be able to ping it over your tunnel. See the FAQ for the exact details.
Next to that, it would be useful if you actually supplied details. See that big yellow/orange box for a link, it is there for a reason.
New tunnel pinging but after 24 hours still no stats
![]()
Tunnel Information for T61993
The configuration for this tunnel looks like:
Tunnel Name
My First Tunnel
PoP Name
czprg01
PoP Location
Prague, Czech Republic
PoP IPv4
217.31.57.16
TIC Server
tic.sixxs.net (default in AICCU)
Your Location
Prague, Czech Republic
Your IPv4
Static
IPv6 Prefix
2a01:8c00:ff00:98::1/64
PoP IPv6
2a01:8c00:ff00:98::1
Your IPv6
2a01:8c00:ff00:98::2
Created
2011-04-01 07:28:04 CEST
State
Enabled
=== Begin Ping ===
Host: 2a01:8c00:ff00:98::2
IP: 2a01:8c00:ff00:98::2
Success: 100%
Latency: 115.507ms
=== End Ping ===
=== Begin Ping ===
Host: 2a01:8c00:ff00:98::2
IP: 2a01:8c00:ff00:98::2
Success: 100%
Latency: 112.319ms
=== End Ping ===
These are results I get when pinging from http://www.ipv6tools.org/ to my end of tunnel
=== Begin Ping ===
Host: 2a01:8c00:ff00:98::1
IP: 2a01:8c00:ff00:98::1
Success: 50%
Latency: 111.117ms
=== End Ping ===
This is ping to POP that works as expected.
POP is Ignum, the only in Czech Republic and if I check my tunnel graphs, it shows loss 100%. How come loss 100% if I can prove tunnel is alive? If any site can ping it, why POP should not?
New tunnel pinging but after 24 hours still no stats
See the FAQ it explains it all.
New tunnel pinging but after 24 hours still no stats
![]()
thank you. you were right. It was in comments to articles about the juniper settings
|