|
Setting up Tunnel under FreeBSD
![[de]](/s/countries/de.gif) Shadow Hawkins on Tuesday, 31 August 2004 11:52:27
Hi,
i'm using FreeBSD 4.9 and tried to set up my requested dynamic sixxs tunnel. That's what i've done:
- if followed the instructions on https://noc.sixxs.net/faq/connectivity/?faq=ossetup&os=freebsd
- put this in my rc.conf:
ipv6_ifconfig_rl0="2001:06f8:0900:032b:0000:0000:0000:0002 prefixlen 64"
ipv6_enable="yes"
- installed heartbeatd and used the config file that the Tunnel Information page gave me
According to the "Tunnel Statistics" my tunnel seems to be up. I also can ping6 and traceroute6 my v6 address and my pop's v6 address. But i can't ping6 any other IPv6 Addresses:
root@smaug:/etc > ping6 3FFE:80c0:220:0:0:0:0:B
ping6: UDP connect: No route to host
Can anyone help?
Thx
Max
Setting up Tunnel under FreeBSD
root@smaug:/etc > ping6 3FFE:80c0:220:0:0:0:0:B
And where might that host be, is that nearby?
You really should have a look at your routing table.
For further hints on debugging see the FAQ and the contact page for a 'reporting problems list'.
In your 'config' above you don't configure a default gateway...
Also note that you might want to check out the new AICCU beta which should automate this for you.
Setting up Tunnel under FreeBSD
Shadow Hawkins on Saturday, 04 September 2004 22:31:49
Thx for the help. I fixed my Internet6 routing table and my tunnel is working now. Howerver it is still pretty slow. I just get about 20 to 25kB/s with my sixxs tunnel. Any idea how i can get it faster?
greetings
Max
|
![[ch]](/s/countries/ch.gif)
on Tuesday, 31 August 2004 12:14:13
Posting is only allowed when you are