SixXS::Sunset 2017-06-06

Configuration sanity check.
[au] Shadow Hawkins on Monday, 15 September 2014 00:06:14
Hello, Summary NIC Handle: FCF6-SIXXS Tunnel ID: T154477 Device: Airport Extreme Version: 7.6.4 Tunnel Endpoint: ausyd01 As best I can determine my set up is correct but, before I make a ticket, I'd like to run my issue past the forum. I am getting the following error on the "Tunnel Information" page Static, currently No such Tunnel ID (T154477/T154477) found and, on the live tunnel status page it says such Tunnel ID (T154477/T154477) found am I doing something wrong or does this tunnel configuration still need to propagate (on the server side, so to speak) to ausyd01 before I can use it? Details The device in question, details above, is configure as follows * IPv6 WAN Address : 2001:4830:1200:3f::2 * IPv6 Default Route : 2001:4830:1200:3f::1 * Remote IPv4 Address : 66.186.206.66 * IPv6 Delegated Prefix : 2001:4830:1200:803f::/64 * IPv6 LAN Address : 2001:4830:1200:803f:: Traceroute to POP
traceroute to 66.186.206.66 (66.186.206.66), 64 hops max, 52 byte packets 1 172.16.111.1 (172.16.111.1) 7.313 ms 0.887 ms 0.773 ms 2 lns20.syd7.on.ii.net (150.101.199.219) 23.009 ms 22.455 ms 22.756 ms 3 te3-1-120.cor2.syd6.on.ii.net (150.101.199.241) 33.686 ms 23.195 ms 138.918 ms 4 ae5.br1.syd7.on.ii.net (150.101.33.50) 28.699 ms 31.912 ms 128.583 ms 5 ae0.br1.syd4.on.ii.net (150.101.33.14) 169.970 ms 30.044 ms 38.610 ms 6 as4826.nsw.ix.asn.au (218.100.52.6) 24.581 ms 28.362 ms 24.565 ms 7 ten-0-3-0-0.cor03.syd03.nsw.vocus.net.au (175.45.72.117) 25.293 ms 23.328 ms 24.308 ms 8 ten-0-1-0.bdr02.syd03.nsw.vocus.net.au (114.31.192.61) 22.222 ms 29.593 ms 28.129 ms 9 as30071.cust.bdr02.syd03.nsw.vocus.net.au (114.31.200.93) 26.953 ms 23.581 ms 26.198 ms 10 66.186.206.66 (66.186.206.66) 26.942 ms 34.069 ms 29.408 ms
On the device it simply says "IPv6 Tunnel Error". Please let me know if you need more information; any assistance appreciated. Thanks, Fred.
Configuration sanity check.
[au] Shadow Hawkins on Monday, 15 September 2014 22:46:06
Just to follow-up here - my tunnel has started working. It appears to have recently been brought up and I don't see those errors any more and I can access IPv6 hosts. Thanks, Fred.

Please note Posting is only allowed when you are logged in.

Static Sunset Edition of SixXS
©2001-2017 SixXS - IPv6 Deployment & Tunnel Broker