|
How to configurate the tunnel in Airport Extreme 7.6.4?
![[de]](/s/countries/de.gif) Shadow Hawkins on Sunday, 06 October 2013 15:58:25
Hi,
I can't get the tunnel in my Airport Extreme (FW: 7.6.4) working.
The only message is: IPV6 tunnel error.
this is my configuration looks like:
IPv6 configuration: manual
IPv6 Modus: Tunnel
IPv6-WAN-address: [my IPv6 from the Tunnel Approval Email like 2001:xxxx:xxxx:xxxx::2]
IPv6 Default Route: [SixXS IPv6 from the Tunnel Approval Email ending with 2001:xxxx:xxxx:xxxx::1]
Remote IPv4 Address: 78.35.24.124
delegated IPv6-Prefix: [my Subnet Prefix like "2001:xxxx:xxxx:xxxx::/64"]
IPv6 LAN Address: [like above without '/64': 2001:xxxx:xxxx:xxxx::]
My Network topo looks like this:
public IPv4 (Provider: T-Online, Germany) - Speedport W722V (NAT) - Airport Extreme (local static IP, DHCP) - Clients...
Has anybody an idea?
best regards,
Christian
How to configurate the tunnel in Airport Extreme 7.6.4?
The only message is: IPV6 tunnel error.
Airports only do IPv6 tunnels when the address the thing itself has is public.
How to configurate the tunnel in Airport Extreme 7.6.4?
Shadow Hawkins on Monday, 07 October 2013 07:46:02
Jeroen Massar wrote:
>The only message is: IPV6 tunnel error.
Airports only do IPv6 tunnels when the address the thing itself has is public.
I also tried this configuration:
(T-Online) - Modem - PPPoE - (public IP) Airport Extreme (NAT, DHCP) - Clients...
But I got the same error message.
|
![[ch]](/s/countries/ch.gif)
on Sunday, 06 October 2013 23:29:40
Posting is only allowed when you are