SixXS::Sunset 2017-06-06

SixXS Interface doesn't get created on DD-WRT
[br] Shadow Hawkins on Friday, 28 February 2014 14:50:03
Hello, I think this is more because of DD-WRT but guess other people may have had the same issue when trying to set a SixXS tunnel on it. I'm running a newer version of DD-WRT with kernel version 3.10.24. Build is 23138 and v24-sp2. It works to load the ipv6 kernel module (insmod ipv6.ko), but when I try to load sit.ko and ip6_tunnel.ko it doesn't show up when running a "lsmod" As I result when I run the aiccu (which is built in on the image) it go through the authentication process and gets all the necessary information but fails to bring up a new interface. I suspect this is due to one of those two modules (sit.ko and/or ip6_tunnel.ko) Has anyone had the same issue or is running a different kernel or build version. Please find below the log and see at the end the interface creating failing: Many thanks --------------------------------------------------- root@madruga:/tmp# aiccu start aiccu.conf sock_getline() : "200 SixXS TIC Service on uschi03.sixxs.net ready (http://www.sixxs.net)" sock_printf() : "client TIC/draft-00 AICCU/2007.01.15-console-linux Linux/3.10.24" sock_getline() : "200 Client Identity accepted" sock_printf() : "get unixtime" sock_getline() : "200 1393585395" sock_printf() : "username FFZ3-SIXXS" sock_getline() : "200 FFZ3-SIXXS choose your authentication challenge please" sock_printf() : "challenge md5" sock_getline() : "200 f2a39a874bd3e429dc6ca113cde131d6" sock_printf() : "authenticate md5 27dd158f8ca02c4ce4f5a03d4e493a6c" sock_getline() : "200 Successfully logged in using md5 as FFZ3-SIXXS (Fernando Frediani)" sock_printf() : "tunnel show T142058" sock_getline() : "201 Showing tunnel information for T142058" sock_getline() : "TunnelId: T142058" sock_getline() : "Type: 6in4-heartbeat" sock_getline() : "IPv6 Endpoint: 2001:xxxx:xxx:xxx::2" sock_getline() : "IPv6 POP: 2001:xxxx:xxx:xxx::1" sock_getline() : "IPv6 PrefixLength: 64" sock_getline() : "Tunnel MTU: 1280" sock_getline() : "Tunnel Name: My First Tunnel" sock_getline() : "POP Id: brudi01" sock_getline() : "IPv4 Endpoint: heartbeat" sock_getline() : "IPv4 POP: 201.48.254.14" sock_getline() : "UserState: enabled" sock_getline() : "AdminState: enabled" sock_getline() : "Password: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" sock_getline() : "Heartbeat_Interval: 60" sock_getline() : "202 Done" Succesfully retrieved tunnel information for T142058 sock_printf() : "QUIT In My Garden" Tunnel Information for T142058: POP Id : brudi01 IPv6 Local : 2001:xxxx:xxx:xxx::2/64 IPv6 Remote : 2001:xxxx:xxx:xxx::1/64 Tunnel Type : 6in4-heartbeat Adminstate : enabled Userstate : enabled ioctl: No such device SIOCGIFFLAGS: No such device SIOCSIFMTU: No such device ioctl: No such device Cannot find device "sixxs" heartbeat_socket() - IPv4 : 177.xxx.xxx.xxx ioctl: No such device [HB] HEARTBEAT TUNNEL 2001:xxx:xxx:xxx::2 sender 1393585399 ab664b791bed3a5516e87c68f1213e29 [HB] HEARTBEAT TUNNEL 2001:xxx:xxx:xxx::2 sender 1393585399 ab664b791bed3a5516e87c68f1213e29
SixXS Interface doesn't get created on DD-WRT
[us] Shadow Hawkins on Tuesday, 14 October 2014 01:03:27
Fernando Frediani wrote:
Hello, I think this is more because of DD-WRT but guess other people may have had the same issue when trying to set a SixXS tunnel on it. I'm running a newer version of DD-WRT with kernel version 3.10.24. Build is 23138 and v24-sp2. It works to load the ipv6 kernel module (insmod ipv6.ko), but when I try to load sit.ko and ip6_tunnel.ko it doesn't show up when running a "lsmod" As I result when I run the aiccu (which is built in on the image) it go through the authentication process and gets all the necessary information but fails to bring up a new interface. I suspect this is due to one of those two modules (sit.ko and/or ip6_tunnel.ko) Has anyone had the same issue or is running a different kernel or build version. Please find below the log and see at the end the interface creating failing: Many thanks --------------------------------------------------- root@madruga:/tmp# aiccu start aiccu.conf sock_getline() : "200 SixXS TIC Service on uschi03.sixxs.net ready (http://www.sixxs.net)" sock_printf() : "client TIC/draft-00 AICCU/2007.01.15-console-linux Linux/3.10.24" sock_getline() : "200 Client Identity accepted" sock_printf() : "get unixtime" sock_getline() : "200 1393585395" sock_printf() : "username FFZ3-SIXXS" sock_getline() : "200 FFZ3-SIXXS choose your authentication challenge please" sock_printf() : "challenge md5" sock_getline() : "200 f2a39a874bd3e429dc6ca113cde131d6" sock_printf() : "authenticate md5 27dd158f8ca02c4ce4f5a03d4e493a6c" sock_getline() : "200 Successfully logged in using md5 as FFZ3-SIXXS (Fernando Frediani)" sock_printf() : "tunnel show T142058" sock_getline() : "201 Showing tunnel information for T142058" sock_getline() : "TunnelId: T142058" sock_getline() : "Type: 6in4-heartbeat" sock_getline() : "IPv6 Endpoint: 2001:xxxx:xxx:xxx::2" sock_getline() : "IPv6 POP: 2001:xxxx:xxx:xxx::1" sock_getline() : "IPv6 PrefixLength: 64" sock_getline() : "Tunnel MTU: 1280" sock_getline() : "Tunnel Name: My First Tunnel" sock_getline() : "POP Id: brudi01" sock_getline() : "IPv4 Endpoint: heartbeat" sock_getline() : "IPv4 POP: 201.48.254.14" sock_getline() : "UserState: enabled" sock_getline() : "AdminState: enabled" sock_getline() : "Password: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx" sock_getline() : "Heartbeat_Interval: 60" sock_getline() : "202 Done" Succesfully retrieved tunnel information for T142058 sock_printf() : "QUIT In My Garden" Tunnel Information for T142058: POP Id : brudi01 IPv6 Local : 2001:xxxx:xxx:xxx::2/64 IPv6 Remote : 2001:xxxx:xxx:xxx::1/64 Tunnel Type : 6in4-heartbeat Adminstate : enabled Userstate : enabled ioctl: No such device SIOCGIFFLAGS: No such device SIOCSIFMTU: No such device ioctl: No such device Cannot find device "sixxs" heartbeat_socket() - IPv4 : 177.xxx.xxx.xxx ioctl: No such device [HB] HEARTBEAT TUNNEL 2001:xxx:xxx:xxx::2 sender 1393585399 ab664b791bed3a5516e87c68f1213e29 [HB] HEARTBEAT TUNNEL 2001:xxx:xxx:xxx::2 sender 1393585399 ab664b791bed3a5516e87c68f1213e29
Fernando, I ran an AYIYA tunnel on a DD-WRT router a couple years ago. My recollection is a bit foggy but I do recall that getting the tunnel up was a bit problematic. As I recall it was apparently a race condition and every time the router was rebooted I had to manually bring up the tunnel from the web interface.
SixXS Interface doesn't get created on DD-WRT
[ch] Jeroen Massar SixXS Staff on Tuesday, 14 October 2014 08:25:53
He was likely just missing the right kernel modules, this is also what he states himself.

Please note Posting is only allowed when you are logged in.
Static Sunset Edition of SixXS
©2001-2017 SixXS - IPv6 Deployment & Tunnel Broker